composition analysis of metalworking fluid products-凯发k8国际首页登录

composition analysis of metalworking fluid products

metalworking fluids are fluids used mainly for metalworking, mainly for lubrication and cooling, but also for rust prevention and cleaning. general metalworking fluids include cutting fluids, cutting oils, emulsions, stamping oils, quenching oils, quenching agents, high temperature oils, extreme pressure cutting fluids, grinding fluids, rust prevention oils, cleaning agents, blackening agents, deep drawing oils, thickeners, etc. metalworking cutting fluids are low foaming, high lubricity soluble lubricants that minimise maintenance costs even when used in demanding environments. and cooling.

there are four main functions of metalworking fluids, one is to cool, take away the large amount of heat generated by cutting and plastic deformation, and prevent the welding and prop strength between the friction surfaces from decreasing; the second is to reduce frictional wear, change the friction state, speed up cutting, extend the life of the tool or mould, and improve the surface finish of processing, the third is to flush away the cutting, and the fourth is to prevent rust, so that the surface of the workpiece with cutting fluid has a short-term anti-rust effect.

as human beings realize the importance of environmental protection of the earth on which they live, they put environmental protection in the first place. the research, production and use of metalworking oils (fluids) must first meet the requirements of environmental protection regulations and must take into account the protection of workers' health and safety, whether they are harmful to the environment, and the disposal of waste fluids after processing. the composition of various metalworking fluids must therefore be non-toxic, low odour, low oil mist, long life, low waste disposal costs and biodegradable. environmentally friendly metalworking oils (fluids) have been an important topic of research in recent times. synthetic fluids are the direction of development for metalworking oils (fluids).

noa has a central laboratory of nearly 30,000m2 with organic, inorganic, physical and chemical laboratories, thermal analysis, mechanics, reliability, combustion and weathering laboratories. we can provide one-stop analysis and testing services for adhesive products such as raw material quality control, composition analysis, foreign substance analysis, performance testing, environmental performance and reliability testing.

service content

noa can provide composition analysis, formulation analysis, failure analysis, comparative analysis, foreign matter analysis, environmental protection testing and other services through spectroscopy, chromatography, nuclear magnetism and other large precision instruments, using "light, colour, heat, mass, meta-chemical" multi-analysis techniques, to help customers analyse the chemical composition and composition content of samples, or qualitative and quantitative analysis of specified ingredients and content according to customer requirements, identification of raw materials, additives, specific ingredients, content and foreign matter components and other analytical services.

i. service offerings

service offerings	common products
cutting fluids	fully synthetic cutting fluids, semi-synthetic cutting fluids, emulsions, cutting oils, etc.
wire cutting fluids	edm wire cutting fluids, silicon wafer cutting fluids, metal grinding fluids
polishing agents	diamond grinding and polishing agents, glass grinding and polishing agents, sapphire grinding and polishing agents, silicon wafer grinding and polishing agents, etc.
lubricants	metalworking oils, lubricant additives
chemical conversion membrane	phosphating liquids, vitrified liquids, chromating agents, passivating agents, skinning agents, sealers
electroplating chemical plating	zinc plating brightener, nickel plating brightener, tin plating additive

ii. services

service	service definition
component analysis	qualitative and quantitative analysis of the constituents
product development	qualitative and quantitative analysis of the composition raw material recommendation equipment recommendation process guidance
comparative analysis	qualitative and quantitative analysis of constituents description of differences in composition suggestions for performance improvement
foreign body analysis	foreign body discovery analysis protocol test results foreign body composition analysis conclusions
environmental testing	volatile organic compounds, hazardous substances limits
specified component analysis	compound name and content test method
large-scale instrument testing	ftir, nmr, gcms, icpms, lcms, gpc and other instrumental tests
raw material quality control	raw material purity testing, material characterisation, qualitative and quantitative analysis of specified components

service process

q&a

what are the main categories of cutting fluids and what are the disadvantages of each product?

cutting fluids are mainly divided into water-based cutting fluids and cutting oils, water-based common are fully synthetic cutting fluids, semi-synthetic cutting fluids, emulsions. fully synthetic cutting fluid products have poor rust prevention, insufficient lubrication, relatively low cost and long life, semi-synthetic cutting fluid products have poor rust prevention, insufficient lubrication, foam, emulsion products have short life and easy to smell, cutting oil has high cost, heavy oil mist and health hazards.

what is the machining process for cutting oils?

cutting oils are compounded systems in which rust inhibitors, lubricants, extreme pressure agents, rust inhibitors, defoamers, film formers, some with emulsifiers, are added to the base oil and stirred until well mixed, requiring heating if necessary.

as the metalworking fluid industry is becoming more environmentally friendly, what support can noa provide to companies in this area?

noa can test metalworking fluid products for voc and hazardous substance limits in accordance with national standards to determine whether they can meet national environmental standards; at the same time, noa has the ability to analyse and develop new products to help companies develop new products in the direction of environmental protection such as water-based products.

what is noa lab's better solution for product enhancement when it comes to poor stability of metalworking fluid emulsions, foaming problems in machining fluids, and smelly machining fluids?

equipped with high-precision instruments and professional technicians, noa's testing laboratory is able to provide technical services such as formula optimisation, raw material recommendation and process guidance to help enterprises achieve product performance improvement and reduce production costs.

our advantage

authoritative qualification

noa has been approved by certification and accreditation administration of the people’s republic of china（cnca）(cnca-r-2002-051), and has obtained qualification of china inspection body and laboratory mandatory approval (cma),and has passed the multiple approvals of china national accreditation service for conformity assessment (cnas), international accreditation service (ias), united kingdom accreditation service (ukas), joint accreditation system of australia and new zealand (jas-anz). noa has been approved by state administration for market regulation of china, and has been recognized as inspection and testing institution of china's special equipment, as well as the qualification of china's national equipment supervision and engineering supervision. noa-dci is the notified body of the ce directive of the european commission. noa has been recognized by the international electrotechnical commission (iecq) by obtaining electronic component quality assessment system. it is also a national inspection and assessment notified body of import and export commodity in china.noa is a high-tech enterprise in shanghai.

improve performance, realize asset value appreciation, and service throughout the entire value chain

from pre-design to post-operation, noa has the ability to guarantee the whole life cycle of the business. noa, as an independent third-party inspection company, has a large number of domestic and international standards and specifications proficient in design, welding, non-destructive testing, painting, packaging and other fields the experienced team of professional engineers and inspection experts, with more than ten years of experience in the domestic market, is familiar with all aspects of the domestic industrial equipment supply chain, and can provide you with technical support services for the full life cycle of technical services in a timely manner, combining various products. inspection, certification, testing, consulting, and auditing services can provide you with one-stop all-round comprehensive services.

quality, efficiency and service

noa has formed a mature and solid operation system in the development of more than 20 years. we let technical experts who are familiar with market regulations and testing standards and have professional industry experience to carry out inspection, evaluation and design review work. while meeting the requirements of domestic and international standards, we ensure that customers can obtain satisfactory service results in the first time with accurate time-sensitive management methods, and ensure that customers can seize the opportunity in the market competition.

service area

noa inspection services currently cover europe, australia, russia, some middle east regions and most regions in china. noa can ensure the consistency and continuity of customer service in different regions, and eliminate the impact of unfamiliar environments on customer quality. the guarantees and the impact of project implementation enable customers to participate in different markets across the country or around the world with flawless quality.

submit your request

noa expert team to provide you with high-quality solutions

advisory message

relevant recommendation

related download

logo- analysis & testing

下载